Retro Fit LED Light Units
MAST Products now offers the NEW Retro Fit LED Light, which can be fitted in standard MR16 fixtures, or for replacing the halogen parts in existing fixtures....Read more
High Power LED Ceiling Light
These slim, aluminium units, measuring Ø95mm of diameter and only 23mm in depth, contain 3 x 1Watt LED's which produce a light output, comparable to a 20Watt halogen light....Read more
High Power LED Multi Light
The Multi Light is designed to be used in many ways. The light can be either surface mounted or recessed mounted, by simply removing the back housing.
7 Chip LED Ceiling Light
This 7-Chip LED Ceiling Light is capable of being easily retro-fitted in the same hole as your existing lighting fixture. Many fixture manufacturers use the same cut-out dimensions for this type of fixture.
G4, MR11 & MR16 LED Replacement Bulbs
With the G4, MR11 and MR16 7-Super Bright Chip LED Replacement Bulbs, you can instantly replace all of your halogen lights with LED’s.
Bay15D LED Replacements Bulbs
The Bay15d 50-LED Replacement Bulb will replace your conventional incandescent light bulb, instantly converting your navigation lights to LED, for boats up to 20 meters.
BA15D, BA15S & Festoon T13x44 18
Double Chip LED Replacement Bulbs
The BA15d, BA15s & Festoon style 18-Double Chip LED Replacement Bulbs will replace your conventional incandescent light bulbs,..
High Power LED Navigation Lights
The MAST LED navigation lights are specially developed to save your power and maintenance and to improve the visibility of boats up to 20meters long. The power consumption is only 4-5 Watts and the expected life-time is over 50.000 hours.
LED Chart/Reading Light with touch LED
In the dark you can always find this light very easily due to the red LED which is lighted all the time.
Simply touch the red LED, and the very bright white LED’s will light up. Touch the LED again, and the white LED’s will turn off, leaving only the red LED on.
LED Wall/Reading Light
The LED Wall/Reading Light comes in 3 different design shapes. A 3cm stiff shaft, a 10cm flexible shaft and a 30cm flexible shaft....Read more
LED Flood Light
For this 10 watt LED Flood Light we use the newest Ceramic and Chip technology which can replace a 50 watt halogen flood light.
LED Step/Courtesy Light
The LED Step/Courtesy Light is designed not to shine into your eyes when lighted. Due to the cover design, the light shines downward.
LED Marker Light
The LED Marker Lights are constructed of 316 stainless steel, are exterior rated, and may also be placed underwater as they are totally waterproof.
LED Modules String
The LED Modules have 5 Super Bright LED's. They come as a string 5 meters long, with a total of 40 modules. The wire may be cut after each module to allow for the fitting of any length required.
Flexible LED Strip
This very flexible waterproof LED Strip is easy to fit due to the 3M tape on the back. The Strips are available in Warm White, Cool White, Bright Blue and 7-Colour RGB. The RGB range of colours are White, Red, Light Blue, Dark Blue, Purple, Yellow and Green.
High Power LED Bars
These anodized aluminium units are slim and waterproof, thus allowing you to quickly and easily install or add lighting wherever it may be required.The small 21cm LED Bars come in two shapes - flat and triangular, and in various output colours.
...Read more
High Power RGB LED Bars
The RGB LED Bar gives you the choice of 7 different colours of light in just one fixture. The range of colours are White, Red, Light Blue, Dark Blue, Purple, Yellow and Green.
Slim SMD LED Bar
The Slim SMD LED bar can be installed with the polycarbonate hooks on the rail of a bimini top, or by removing the hooks they can be fitted with screws underneath cabinets, etc. The light output is Warm White which is comfortable for your eyes....Read more
Driver/Dimmer Manual & Wiring Diagram
RGB LED Bars
The DR010101 Driver/Dimmer is for use with the RGB LED Bars with 4.2V/DC input.
A pulse (momentary) switch is required to control the driver.
The green, blue, grey and red wires should always be connected with similar coloured wires.
Retro Fit Led Units Extended Version
Manual & Wiring Diagram
The extended version of the Retro Fit Light Unit will allow you to dim the LED lights as the dimmer is built in to the light. It is a 4-wire system. The black and red wires are the power input wires....Read more
Dimmer 10V-30V/DC - 10V-30V/DC
Manual & Wiring Diagram
The dimmer DR050505 is a 10V-30V/DC special LED dimmer for our LED Lights.
A pulse (momentary) switch is required for controlling the on/off and dimming mode.
Driver/Dimmer Manual
& Wiring Diagram RGB LED Line
The DR020202 Driver/Dimmer is for use with the Flexible RGB LED Lines.We have a 12V and a 24V version available depending on the voltage system to place the line..
...Read more